Easy operation, change tube rapidly. The house material is aluminum alloy or PPS (polyphenylene sulfite). 304 stainless steel rollers. HF-DZ25 pump head use 2.4mm wall thickness tube, the flow rate range is 0.3-6000ml/min. This pump head is suitable for high viscous liquid which include granule and floc. It also suitable for high pressure request. New cartridge structure design, can use the special connector, connect low cost tubing outside the pump head to save cost; also can use flexible tube card, meet hygiene requirement. 

Industry application

Industry machine supporting

Biological fermentation tank matching

Tubing Installation Procedure

HF-DZ25-3L-Installation Procedure-1_

    1. Lift both side levers, take off the upper block.

HF-DZ25-3L-Installation Procedure-2_

    2.  Put the tubing with cartridge or connector into pump housing.

HF-DZ25-3L-Installation Procedure-3_

    3.  Install the upper block, put down the levers to lock the block.

HF-DZ25-3L: the tubing lenght is 90mm between both tubing clamps

HF-DZ25-6L: the tubing lenght is 125mm between both tubing clamps

Product Composition and Flow Rate Range

Model No. Housing Material Tubing Sizes IDxWall thickness (mm) Tubing Clamp Material Flow rate (ml/min) 0.1-600rpm Weight (kg)
HF-DZ25-6L PPS 15# 4.8×2.4 PP 0.3-1800 0.85
HF-DZ25-6L PPS 24# 6.4×2.4 PP 0.55-3300 0.85
HF-DZ25-6L PPS 35# 7.9×2.4 PP 0.8-4800 0.85
HF-DZ25-6L PPS 36# 9.6×2.4 PP 1-6000 0.85

Product Dimension Drawing (mm)