Closed-loop stepper motor

Easy operation, change tube rapidly. The house material is PPS (polyphenylene sulfite). 304 stainless steel rollers. HF-DZ25 pump head use 2.4mm wall thickness tube, the flow rate range is 0.211-6000ml/min. This pump head is suitable for high viscous liquid which include granule and floc. It also suitable for high pressure request. New cartridge structure design, can use the special connector, connect low cost tubing outside the pump head to save cost; also can use flexible tube clamp, meet hygiene requirement.

Characteristic


Industry application

High viscous liquid (include granule and floc)

It is also suitable for high pressure request

Tubing Installation Procedure

    A. Lift both side levers, take off the upper block.

    B. Put the tubing with cartridge or connector into pump housing.

    C. Install the upper block, put down the levers to lock the block.

Pump Head and Flow Rate

Model No. Housing Material Base Protective cover Tubing sizes IDxWall Thickness Speed range (rpm) Flow Rate (ml/min) Weight (kg)
HF-DZ25-3L PPS PP 15# 4.8×2.4 0.1-600 0.211~1264 0.5
HF-DZ25-3L PPS PP 24# 6.4×2.4 0.1-600 0.385~2310 0.5
HF-DZ25-3L PPS PP 35# 7.9×2.4 0.1-600 0.508~3050 0.5
HF-DZ25-3L PPS PP 36# 9.6×2.4 0.1-600 0.6~3600 0.5
Model No. OEM-B501
Speed range 0.1-600rpm
Speed control Digital knob (Optional)
Display OLED (Optional)
Control method Toggle switch control star and stop, direction (optional)
External control start and stop Switch signal (default 5V)
External control speed 0-5V, 4-20mA (standard), 0-10V (optional)
Communication interface RS485 (Modbus protocol, RTU mode)
Motor type 57 Closed-loop stepper motor
Working environment 0-40ºC, 80%RH

Product Dimension Drawing (mm)